Gear Shaping

Gear Shaping

Summary

The process of gear shaping.

Gear Shaping 
The forming method is to directly use the gear forming milling cutter to mill out the tooth valley. The advantage is that the gear can be obtained on the milling machine, which can be considered when the equipment is limited. There are many disadvantages. In order to reduce the number of tools, the number of teeth is segmented. Use a knife in a certain number of teeth, so that the tooth profile will bring systematic errors.
The generative method uses tools and gears to form a generative motion to process gears. There are mainly gear hobbing and gear shaping. Gear hobbing is processed by simulating the meshing of worm gears. Gear shaping is processed by simulating the meshing of two gears. Rolling Tooth is used a lot, because the tooth profile of the hobbing cutter is a linear spindle, which is convenient for processing, and the gear shaping tool is a gear with a shovel back, and the tooth profile is involute, which is not as convenient for machining. But gear shaping. It can be used in some positions where hobbing cannot be processed, such as double or multi-connected gears with internal teeth and short retracting distance. In the finishing of gears, there are gear shaving and gear grinding. The same is the generative method, the gear shaving The advantage is high efficiency but cannot be used for hard tooth surfaces. Grinding is the opposite
Contact Us-Welcome To Send Us Inquiries!!!
Kimer  Zheng

Hangzhou YangQi Imp&Exp Co.,Ltd
杭州阳奇进出口有限公司
Room 1310,Taotiandi Buliding 2,Jianggan District,Hangzhou City ,Zhejiang
Sales2@Chinatransmissions.Com
Mob/Whatsapp:+8618258831202
Wechat:18258831202
Www.Chinatransmissions.Com